123

PS-AWB101 有源开孔箱体

PS-AWB101采用通风的“低音反射”外壳,带有开槽端口,调谐到非常低的频率,可以撼动低音,震动身体的每一个毛孔。并且采用独特的设计,使低音扬声器与箱体完美的融合,在同类型产品中具有较大的优势。这使PS-AWB101音箱具有更深,更紧凑的低音,并且具有很高的性价比,是消费者的超值选择。

  • 尺寸: 311×432×349mm
  • 阻抗: Dual4Ω
  • 最大功率: 350W
  • 额定功率: 175W
  • 频率响应: 33Hz-250 Hz

PS-AWB101采用通风的“低音反射”外壳,带有开槽端口,调谐到非常低的频率,可以撼动低音,震动身体的每一个毛孔。并且采用独特的设计,使低音扬声器与箱体完美的融合,在同类型产品中具有较大的优势。这使PS-AWB101音箱具有更深,更紧凑的低音,并且具有很高的性价比,是消费者的理想选择。

  • Single 10" 175 Watt RMS Amplified Bass Reflex Subwoofer Enclosure

  • Injection Molded PP Cone Woofer

  • 2" BASV Voice Coil Former

  • Large Roll Butyl Rubber Surround

  • Computer Optimized Bass Reflex Enclosure

  • Durable Aircraft Grade Vinyl Finish

  • 1-Channel 175 Watt High Efficiency Class A/B Design

  • High Level (Speaker)/Low Level (RCA) Input

  • Soft Delay Turn On/Off Circuit

  • Auto Turn-on (high level input only)

  • Variable Low Pass Electronic Crossover 50Hz – 200Hz

  • Variable 12dB Bass Boost EQ @ 45 Hz

  • Variable Gain Control

  • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output

  • Variable Wired Remote Gain Control Included

  • Mounting Hardware Included

  • Inputs: Low Level (RCA)/High Level (speaker level)

  • Equalization Boost/Cut: 0dB - 12 dB @ 45 Hz

  • Subwoofer Frequency Range: 20 Hz - 200 Hz

  • Power Supply: PWM MOSFET

  • Bottom Depth: 13.75"

  • Top Depth: 11.4"

  • Height: 12.5"

  • Width: 17"

  • Voice Coil Size: 2"

  • Material: Injection molded Polypropylene cone

  • Magnet Size:

  • Dimensions (in Inches): 12.25" x 17" x 11.4" Top D x 13.75" Bottom D

  • S/N Ratio: >85 dB

  • Total Harmonic Distortion: 0.5% at Rated Power

  • Size: Single 10"

  • Frequency Response: 33 Hz - 250 Hz

  • Power Handling (RMS/Peak): 175 / 350 watts


电话咨询
产品中心
案例展示
QQ客服
123